Calculate output voltage for a voltage divider circuit.
Enter values and click Calculate to see results.
Calculate output voltage for a voltage divider circuit.
Ohm's Law Calculator: Master Voltage, Current, and Resistance Calculations
Voltage Divider Calculator: Precision Voltage Division for Your Circuits
Power Calculator: Comprehensive Guide to Electrical Power Calculations
Resistor Calculator: Complete Guide to Resistor Values and Color Codes
The Voltage Divider Calculator uses the following formula:
The calculation is performed automatically when you click the Calculate button, ensuring error-free results every time. Understanding the formula helps you interpret the results more effectively and see exactly how each input affects the final outcome.
Follow these steps to use the Voltage Divider Calculator:
Enter the input voltage (vin) in the provided input field (e.g., 5).
Enter the resistor r1 (ohm) in the provided input field (e.g., 1000).
Enter the resistor r2 (ohm) in the provided input field (e.g., 2000).
Click the "Calculate" button to compute your results.
Review the detailed results, including charts and breakdowns.
Use the "Reset" button to clear all fields and start a new calculation.
Try the "Load Example" button to see a sample calculation with predefined values.
Here is a practical example to help you understand how the Voltage Divider Calculator works.
Enter these values into the calculator (or click “Load Example Values”) to see how the formula produces accurate results.
When using the Voltage Divider Calculator, be aware of these common mistakes:
Taking a moment to verify your inputs will ensure the most accurate results.
For the best results when using the Voltage Divider Calculator, follow these expert tips:
A simple circuit that produces an output voltage as a fraction of the input using two resistors in series.
Choose R1 and R2 based on the desired output voltage ratio. Higher values use less power but may be less accurate.
Vout = Vin x R2 / (R1 + R2). The output voltage is the input voltage multiplied by the ratio of R2 to total resistance.
They are used in sensor circuits, volume controls, reference voltage generation, level shifting, and biasing transistors.
Connecting a load across R2 reduces the effective resistance, lowering the output voltage. This is called the loading effect.
A potentiometer is a variable voltage divider in a single component. A voltage divider typically uses fixed resistors for a specific ratio.
Power = V^2 / R for each resistor. Sum the power of both resistors to find total power dissipated by the divider.
Avoid very low values that draw excessive current and waste power, or very high values that are susceptible to noise and loading effects.